Manufacturers

Cat No: 664160

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- For excellent analysis by microscopy
- Easy stacking
- Diameter: 100 mm; height: 20 mm
- Growth area: 58 cm²
- Nominal volume: 100 ml
- Working volume: 16 ml - 17 ml
- With vents that ensure very good gas exchange
- TC surface treatment
- Sterile and user-friendly packaging

Cat No: 627160

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- For excellent analysis by microscopy
- Easy stacking
- Diameter: 35 mm; height: 10 mm
- Growth area: 8.7 cm²
- Nominal volume: 10 ml
- Working Volume: 3 ml
- TC surface treatment
- With vents that ensure very good gas exchange
- Improved cell adhesion through physical surface treatment
- Sterile and user-friendly packaging

Cat No: 628160

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- For excellent analysis by microscopy
- Easy stacking
- Diameter: 60 mm; height: 15 mm
- Growth area: 21 cm²
- Nominal volume: 28 ml
- Working volume: 6 ml - 7 ml
- TC surface treatment
- With vents that ensure very good gas exchange
- Sterile and user-friendly packaging

Cat No: 658175

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable D-Nase, RNase, human DNA, non-pyrogenic
- Non-cytotoxic
- The special design of our cell culture flask makes it possible to efficiently reach the cell lawn with a cell scraper, whilst still providing optimal access with a pipette
- The neck of the high profile flask reduces the risk of wetting the inside of the cap with medium, and thus provides additional protection against contamination
- TC surface treatment
- Optimal gas exchange through a high airflow rate os the membrane
- Canted neck
- Graduation on the side
- Growth area: 75 cm²
- Max. volume : 250 ml
- Working volume: 15 ml - 38 ml
- With red filter screw cap
- Sterile and user-friendly packaging

Cat No: 690175

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable D-Nase, RNase, human DNA, non-pyrogenic
- Non-cytotoxic
- The special design of our cell culture flask makes it possible to efficiently reach the cell lawn with a cell scraper, whilst still providing optimal access with a pipette
- The neck of the high profile flask reduces the risk of wetting the inside of the cap with medium, and thus provides additional protection against contamination
- TC surface treatment
- Optimal gas exchange through a high airflow rate os the membrane
- Canted neck
- Graduation on the side
- Growth area: 25 cm²
- Max. volume : 50 ml
- Working volume: 5 ml - 10 ml
- With red filter screw cap
- Sterile and user-friendly packaging

Cat No: 655180

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- Compatible with automated systems
- Alphanumeric well coding
- High clarity of the microplates for optimal microscopic examinations
- Stackable
- Consecutive lot numbering
- Have a uniform footprint, which is conform to the recommendation of the American National Standards Institute (ANSI) (ANSI/SBS 1-2004)
- The risk of contamination from sample material being carried over is minimised
- Solid bottom
- Well profile: F-bottom/chimney well (flat bottom)
- Growth area per well: 34 mm²
- Working volume per well: 25 µl - 340 µl
- With condensation rings in lid (prevent cross-contamination)
- TC surface treatment
- Sterile
- Individually wrapped in peel-off packs for user convenience

Cat No: 665180

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- High clarity and low autofluorescence
- Lid enables gas exchange with the lowest possible evaporation
- Single position lids to prevent cross-contamination
- Alphanumeric well coding
- Compatible with automated systems
- Easy-to-open packaging
- Suitable for all common instruments and for automation
- Growth area per well: 3.9 cm²
- Working volume per well: 2 ml - 4 ml
- TC surface treatment
- Sterile

Cat No: 662160

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- High clarity and low autofluorescence
- Lid enables gas exchange with the lowest possible evaporation
- Single position lids to prevent cross-contamination
- Alphanumeric well coding
- Compatible with automated systems
- Easy-to-open packaging
- Suitable for all common instruments and for automation
- Growth area per well: 1.9 cm²
- Working volume per well: 0.5 ml - 1.5 ml
- TC surface treatment
- Sterile

Cat No: 677180

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- High clarity and low autofluorescence
- Lid enables gas exchange with the lowest possible evaporation
- Single position lids to prevent cross-contamination
- Alphanumeric well coding
- Compatible with automated systems
- Easy-to-open packaging
- Suitable for all common instruments and for automation
- Growth area per well: 1.0 cm²
- Working volume per well: 0.5 ml - 1 ml
- TC surface treatment
- Sterile

Cat No: 657160

Full product specification

General Features:
- Improved cell adhesion through physical surface treatment
- Free of detectable DNase, RNase, human DNA, non-pyrogenic
- Non-Cytotoxic
- High clarity and low autofluorescence
- Lid enables gas exchange with the lowest possible evaporation
- Single position lids to prevent cross-contamination
- Alphanumeric well coding
- Compatible with automated systems
- Easy-to-open packaging
- Suitable for all common instruments and for automation
- Growth area per well: 9.6 cm²
- Working volume per well: 2 ml - 5 ml
- TC surface treatment
- Sterile

Cat No: 421084

Full product specification

General Features:
- Suitable for collection and transport of non-human bacteriological, serological and cytological samples.
- Also useful for hygienic controls in food industry as well as in environmental field.
- Height: 145 mm
- Sterilised by irradiation

Cat No: 126263-100

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- CE-marked
- Made of high-grade polypropylene which guarantees high thermal resistance in a temperature range from -196°C to +121°C
- As a saftety precaution Cryo.s™ should be stored in a freezer or exclusively in the gas phase over the liquid nitrogen
- Suitable for shipment by air
- Round bottom
- Working volume: up to 2.2 ml
- Diameter: 12.5 mm; total height incl. lid: 47 mm
- With starfoot base and external thread
- With screw cap in natural
- With white, scratch-resistant writing area
- Sterile
- With 150 inserts per case (for additional labelling on the cap)
- Additional inserts Cat.-No. 304 171 (50 pieces per bag)

Cat No: 122263-100

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- CE-marked
- Made of high-grade polypropylene which guarantees high thermal resistance in a temperature range from -196°C to +121°C
- As a saftety precaution Cryo.s™ should be stored in a freezer or exclusively in the gas phase over the liquid nitrogen
- Suitable for shipment by air
- Round bottom
- Working volume: 1.8 ml - 2.0 ml
- Diameter: 12.5 mm; total height incl. lid: 48 mm
- With starfoot base and internal thread (with a silicone gasket)
- With screw cap in natural
- With white, scratch-resistant writing area
- Sterile
- With 150 inserts per case (for additional labelling on the cap)
- Additional inserts Cat.-No. 304 171 (50 pieces per bag)

Cat No: 676001-100

Full product specification

General Features:
- Coated with an acrylate adhesive
- Coverage/storage of microplates (e.g in ELISA applications)
- Protection against evaporation and contamination
- Suitable for optical measurements

Cat No: 542000

Full product specification

General Features:
- 100 µM mesh size
- Color: yellow
- Fits all standard 50 ml tubes
- Handle and mantle surface for improved
aseptic handling
- Venting slot for fast filtration
- No liquid overspill
- Convenient blister pack
- Sterile

Cat No: 542040

Full product specification

General Features:
- 40 µM mesh size
- Color: green
- Fits all standard 50 ml tubes
- Handle and mantle surface for improved
aseptic handling
- Venting slot for fast filtration
- No liquid overspill
- Convenient blister pack
- Sterile

Cat No: 542070

Full product specification

General Features:
- 70 µM mesh size
- Color: blue
- Fits all standard 50 ml tubes
- Handle and mantle surface for improved
aseptic handling
- Venting slot for fast filtration
- No liquid overspill
- Convenient blister pack
- Sterile

Cat No: 772288

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Pipette tips with filter inserts prevent contamination with liquids and aerosols during the pipetting process
- In combination with conventional pipettors, filter tips prevent the aspiration of particles into the interior of the pipettor
- This minimises the danger of unwanted cross-contamination
- The special ultra-micro filter made of hydrophobic polyethylene has a pore size of approx. 10 microns and acts as a relialbe barrier against the transfer or aerosols into the shaft of the pipettor
- Are recommended for work with DNA and RNA, and when handling radioactive material
- Can be used with all standard pipettors
- Comply with the German Calibration Ordinance of August 1988
- Maintain the tolerance limits stipulated for pipette tips in DIN 12650
- Are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Suitable for Brand®; Biohit®; Eppendorf®; Gilson®; Socorex®
- Volume: 100 µl
- Sterilised by irradiation

Cat No: 740288

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Pipette tips with filter inserts prevent contamination with liquids and aerosols during the pipetting process
- In combination with conventional pipettors, filter tips prevent the aspiration of particles into the interior of the pipettor
- This minimises the danger of unwanted cross-contamination
- The special ultra-micro filter made of hydrophobic polyethylene has a pore size of approx. 10 microns and acts as a relialbe barrier against the transfer or aerosols into the shaft of the pipettor
- Are recommended for work with DNA and RNA, and when handling radioactive material
- Can be used with all standard pipettors
- Comply with the German Calibration Ordinance of August 1988
- Maintain the tolerance limits stipulated for pipette tips in DIN 12650
- Are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Suitable for Finnpipette®; Gilson®
- Volume: 1000 µl
- With graduation
- Sterilised by irradiation

Cat No: 739288

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic, non-cytotoxic
- Pipette tips with filter inserts prevent contamination with liquids and aerosols during the pipetting process
-In combination with conventional pipettors, filter tips prevent the aspiration of particles into the interior of the pipettor
- This minimises the danger of unwanted cross-contamination
- The special ultra-micro filter made of hydrophobic polyethylene has a pore size of approx. 10 microns and acts as a relialbe barrier against the transfer or aerosols into the shaft of the pipettor
- Are recommended for work with DNA and RNA, and when handling radioactive material
- Can be used with all standard pipettors
- Comply with the German Calibration Ordinance of August 1988
- Maintain the tolerance limits stipulated for pipette tips in DIN 12650
- Are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Suitable for Brand®; Biohit®; Eppendorf®; Gilson®
- Volume: 200 µl
- With graduation
- Sterilised by irradiation

Cat No: 771288

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Pipette tips with filter inserts prevent contamination with liquids and aerosols during the pipetting process
- In combination with conventional pipettors, filter tips prevent the aspiration of particles into the interior of the pipettor
- This minimises the danger of unwanted cross-contamination
- The special ultra-micro filter made of hydrophobic polyethylene has a pore size of approx. 10 microns and acts as a relialbe barrier against the transfer or aerosols into the shaft of the pipettor
- Are recommended for work with DNA and RNA, and when handling radioactive material
- Can be used with all standard pipettors
- Comply with the German Calibration Ordinance of August 1988
- Maintain the tolerance limits stipulated for pipette tips in DIN 12650
- Are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Ideally suited for Gilson® (Gilson® Pipetman P2, P10, U10)
- Volume: 10 µl
- Sterilised by irradiation

Cat No: 731171

Full product specification

General Features:
- Flexible loops for easier collection and inoculation
- Volume: 10 µl
- Length: 200 mm
- Sterilised by irradiation

Cat No: 731161

Full product specification

General Features:
- Flexible loops for easier collection and inoculation
- Volume: 1 µl
- Length: 200 mm
- Sterilised by irradiation

Cat No: 745290

Full product specification

General Features:
- Manufactured from high-grade polypropylene to give the optimum performance and fit
- Additionally, polypropylene has a high breaking strength, is dimensionally stable, heat-resistant up to approx. +140°C, i.e. is autoclavable, and cold-resistant down to -190°C
- Free of heavy metals
- Are manufactured under production conditions certified as conforming to the ISO 9001 standard. They are also tested for conformance with the international standard DIN ISO 8655
- Ideally suited for Gilson® P5000
- Volume: 1 ml - 5 ml

Cat No: 614101-100

Full product specification

General Features:
- Ideal for enzymatic determinations, since the very thin walls enable rapid and uniform tempering
- Manufactured from crystal clear polystyrene
- Characterised by minimal light scatter with high transmission
- Volume: 4 ml
- Applicable wavelength range: 340 nm to 900 nm
- Length: 10 mm; width: 10 mm; height: 45 mm

Cat No: 771290-1000

Full product specification

General Features:
- Manufactured from high-grade polypropylene to give the optimum performance and fit
- Additionally, polypropylene has a high breaking strength, is dimensionally stable, heat-resistant up to approx. +140°C, i.e. is autoclavable, and cold-resistant down to -190°C
- Free of heavy metals
- Are manufactured under production conditions certified as conforming to the ISO 9001 standard. They are also tested for conformance with the international standard DIN ISO 8655
- Micro pipette tips are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Ideally suited for Gilson ® Pipetman P2, P10, U10
- Volume: 0.5 µl - 10 µl
- Matching rack Cat.-No. 973 276

Cat No: 655074

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic
- Manufactured under DIN ISO 9001 guidelines
- Can be traced all the way back to production through a defined LOT number system
- Has the same well profile as the standard flat bottom plate. The difference from the standard plate is the chimney-like arrangement of the wells. Each well stands on its own
- The risk of sample carryover and cross-contamination is minimised
- Suitable for fluorescence measurements
- Has been specifically treated to provide an incresed protein binding
- Solid bottom
- Well profile: F-bottom/chimney well (flat bottom)
- FLUOTRAC™ 600, high binding
- Sterile

Cat No: 655081

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic
- Manufactured under DIN ISO 9001 guidelines
- Can be traced all the way back to production through a defined LOT number system
- Manufactured from crystal clear polystyrene
- The footprint is compatible with automated systems
- Well to well spacing : 9 mm
- Alphanumeric well coding
- Suitable for transmission measurements
- Has been specifically treated to provide an incresed protein binding
- Well profile: F-bottom / chimney well (flat bottom)
- MICROLON® 600, high binding

Cat No: 655077

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic
- Manufactured under DIN ISO 9001 guidelines
- Can be traced all the way back to production through a defined LOT number system
- Has the same well profile as the standard flat bottom plate. The difference from the standard plate is the chimney-like arrangement of the wells. Each well stands on its own
-The risk of sample carryover and cross-contamination is minimised
-Suitable for luminescence measurements
-Has been specifically treated to provide an incresed protein binding
-Solid bottom
- Well profile: F-bottom/chimney well (flat bottom)
-LUMITRAC™ 600, high binding
-Sterile

Cat No: 655101

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic
- Manufactured under DIN ISO 9001 guidelines
- Can be traced all the way back to production through a defined LOT number system
- Is ideal for precise optical measurements. The measuring light source is not deflected by the well profile
- Excellent optical properties as a result of the flat bottom of the wells
- For microscopic apllications (bottom reading)
- Solid bottom
- Well profile: F-bottom/standard (flat bottom)

Cat No: 655161

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic
- Manufactured under DIN ISO 9001 guidelines
- Can be traced all the way back to production through a defined LOT number system
- Is ideal for precise optical measurements. The measuring light source is not deflected by the well profile
- Excellent optical properties as a result of the flat bottom of the wells
- For microscopic apllications (bottom reading)
- Solid bottom
- Well profile: F-bottom/standard (flat bottom)
- Sterile

Cat No: 663102

Full product specification

General Features:
- Easy stacking
- Vented for better gas exchange
- Heavy design for better heat resistance using hot agar
- Manufactured from crystal polystyrene for optimal analysis by microscopy
- Diameter: 100 mm; height: 15 mm

Cat No: 627102

Full product specification

General Features:
- Easy stacking
- Vented for better gas exchange
- Manufactured from crystal polystyrene for optimal analysis by microscopy
- Diameter: 35 mm; height: 10 mm

Cat No: 628102

Full product specification

General Features:
- Easy stacking
- Vented for better gas exchange
- Manufactured from crystal polystyrene for optimal analysis by microscopy
- Diameter: 60 mm; height: 15 mm

Cat No: 633185

Full product specification

General Features:
- Easy stacking
- Vented for better gas exchange
- Manufactured from crystal polystyrene for optimal analysis by microscopy
- Diameter: 94 mm; height: 15 mm

Cat No: 739296-1000

Full product specification

General Features:
- Manufactured from high-grade polypropylene to give the optimum performance and fit
- Additionally, polypropylene has a high breaking strength, is dimensionally stable, heat-resistant up to approx. +140°C, i.e. is autoclavable, and cold-resistant down to -190°C
- Free of heavy metals
- Are manufactured under production conditions certified as conforming to the ISO 9001 standard. They are also tested for conformance with the international standard DIN ISO 8655
- They make it possible to use the same pipette tip for all pipettors and thus simplify storage, as well as saving time when reordering
- With graduation which enables the user to better check the pipetted volume
- Ideally suited for Biohit®; Brand®; Eppendorf®; Gilson®; Socorex®
- Volume: 10 µl - 200 µl
- Matching rack: Cat.-No. 941 315

Cat No: 740296-1000

Full product specification

General Features:
- Manufactured from high-grade polypropylene to give the optimum performance and fit
- Additionally, polypropylene has a high breaking strength, is dimensionally stable, heat-resistant up to approx. +140°C, i.e. is autoclavable, and cold-resistant down to -190°C
- Free of heavy metals
- Are manufactured under production conditions certified as conforming to the ISO 9001 standard. They are also tested for conformance with the international standard DIN ISO 8655
- Are recommended when pipettors from different manufacturers are used at the same time
- Ideally suited for Brand®; Eppendorf®; Finnpipette®; Gilson®; Socorex®
- Volume: 200 µl - 1000 µl
- With graduation that makes it easier to check the pipetted volume
- Matching rack Cat.-No. 941 325

Cat No: 607180

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- A coloured vertical Schellbach stripe makes it considerably easier to read off the volume
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 1/10

Cat No: 604181

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 1/100

Cat No: 760180

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- A coloured vertical Schellbach stripe makes it considerably easier to read off the volume
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 2/10

Cat No: 710180

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 1/100

Cat No: 768180

Full product specification 

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- A coloured vertical Schellbach stripe makes it considerably easier to read off the volume
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 1/2

Cat No: 606180

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Sterile
- High optical clarity
- Maximum accuracy
- Drop-free pipetting
- Clear, easily legible graduation
- A coloured vertical Schellbach stripe makes it considerably easier to read off the volume
- Pipetting units available on request
- Increased volume from negative graduations
- Pipette colour code according to international standards
- Maximum clarity from high-grade polystyrene
- Lot number and best-before date on each bag
- All pipettes are supplied with a synthetic fibrous filter material for protection against the suction of liquid into the pipetting device (exception: the aspiration pipette without fibrous filter material)
- Paper/plastic-packaging with peel-off function for individually wrapped pipettes with an additional break-through function
- Graduation: 1/10

Cat No: 667201-1000

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic
- High chemical and temperature resistance
- Volume: 0.5 ml
- With attached cap
- Suitable for Viatron

Cat No: 616201-1000

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic
- High chemical and temperature resistance
- Volume: 1.5 ml
- With graduation and attached cap
- Suitable for Eppendorf

Cat No: 623201-1000

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic
- High chemical and temperature resistance
- Volume: 2.0 ml
- With graduation and attached cap
- Suitable for Eppendorf

Cat No: 613101-100

Full product specification

General Features:
- Ideal for enzymatic determinations, since the very thin walls enable rapid and uniform tempering
- Manufactured from crystal clear polystyrene
- Characterised by minimal light scatter with high transmission
- Volume: 1.6 ml
- Applicable wavelength range: 340 nm to 900 nm
- Length: 10 mm; width: 10 mm; height: 45 mm

Cat No: 676090-100

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic
- Coated with an acrylate adhesive
- Pierceable
- Temperature-resistant from -80°C to +110°C
- Ideal for PCR applications
- Ideal for the storage of sample material and active agents
- Remains flat, when removed from its paper backing, and can thus be easily applied to all microplate types
- A double perforation makes it possible to tear off the projecting adhesive sealer and thus improves the stacking of sealed microplates

Cat No: 774288

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Pipette tips with filter inserts prevent contamination with liquids and aerosols during the pipetting process
- In combination with conventional pipettors, filter tips prevent the aspiration of particles into the interior of the pipettor
- This minimises the danger of unwanted cross-contamination
- The special ultra-micro filter made of hydrophobic polyethylene has a pore size of approx. 10 microns and acts as a relialbe barrier against the transfer or aerosols into the shaft of the pipettor
- Are recommended for work with DNA and RNA, and when handling radioactive material
- Can be used with all standard pipettors
- Comply with the German Calibration Ordinance of August 1988
- Maintain the tolerance limits stipulated for pipette tips in DIN 12650
- Are suitable for the precise pipetting of the smallest possible liquid volumes as a result of their small size and thus small dead volume
- Suitable for Brand®, Biohit®, Eppendorf®, Gilson®, Socorex®
- Volume: 20 µl
- Sterilised by irradiation

Cat No: 188271

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-Pyrogenic, non-cytotoxic
- Polypropylene displays high thermal, mechanical and chemical resistance. It is therefore recommended for the storage of chemical and biological samples
- Diameter: 17 mm; height: 120 mm
- Nominal volume: 15 ml
- Working volume: 14 ml
- With blue screw cap
- With blue graduation and white writing area
- Sterile

Cat No: 227261

Full product specification

General Features:
- Free of detectable DNase, RNase, human DNA
- Non-pyrogenic, non-cytotoxic
- Polypropylene displays high thermal, mechanical and chemical resistance. It is therefore recommended for the storage of chemical and biological samples
- Diameter: 30 mm; height: 115 mm
- Nominal volume: 50 ml
- Working volume: 50 ml
- With blue screw cap
- With blue graduation and white writing area
- Sterile